EETI

Product Detail

With professional eeti factory, Finelink Photoelectric is one of the leading China eeti manufacturers and suppliers. Welcome to wholesale products from us.

 

Touch Panel Controller

 

EETI is based on the chip EXC3188 of EETI,which can support to10 touch point.This touch panel controller provides  the optimistic performance of your projected capacitive touch panels. It communicates with PC system directly  through USB/I2C connector. You can see how superior the design is in sensitivity accuracy and friendly operation. The touch panel driver emulates mouse left and right button function and supports operation systems as following.

 

 

OS	Version	Interfaces
	Windows 8(Need logo submission)
	Windows 7
Windows	Windows Vista, XP/2000	USB/RS232
	Windows CE.net/5.0/6.0/7.0
	Windows Embedded
	Windows XP Tablet PC edition
	Distribution based on Kernel 2.6.24 and
	later.
	(Ubuntu/Linux Mint
	Debian	USB/RS232
Linux	Fedora
	Red Hat/CentOS
	Magaie/Mandriva/Mandrake
	SUSE/openSUSE
	Android 2.3 ~ 4.4	USB/RS232
Mac	Mac OS, Mac OS X (PowerPC, Intel CPU)	USB
QNX	QNX RTOS v6.3	USB/RS232

 

Controller:




 

Thickness: Total thickness: 8.0mm ± 0.2mm (Including PCB: 1.2mm ± 0.1mm. USB/I2C connector: 5.1mm. Soldering pin: 1.3 mm)

 

 Specifications:



Circuit Board Dimension	3.2mm x 12mm
Channels of Panel	Max. Tx:46 Rx:78 channels (exclude shielding pin)
Input Voltage	3.5V~5.5V.Typical 5V.
Operating Temperature	-40 to 85 ?
-40 to 85 ?	-40 to 90 ?
Storage Temperature
-40 to 90 ?	95% at 60 ?, RH Non-condensing
Relative Humidity
	Line drawing accuracy :
Linearity(Note 1)	1px +/- 1mm offset /10mm
	Touch (point) accuracy : 1px +/- 1mm
	Refer to Windows 8 Logo regulation
	USB: 1.1 Full Speed
Interface	RS232: No parity,8 data bits,1 stop bit, baud rate
	115200bps
	I2C:100K/400K Hz
Resolution	4096*4096 resolution
	Active Mode: 82~85mA
Power consumption(mA)	Idle Mode : 36~38mA
	Sleep Mode :< 5mA
	(Operation Mode :Active Mode only)
Report rate(points/sec)	>100 Hz
(Note 2)
Response time	Average < 25 ms